Difficulty
Moderate
Steps
2
Time Required
- DIY Longboard Kit Build 2 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Introduction
Congratulations on your new longboard! I will do my best to be short and concise on the step you will need to take to build this incredible piece of equipment.
-
-
I always like to start a build by carefully unpacking the kit and laying out each item to inventory and verify all has been included.
-
-
-
With any skateboard deck, the first step should always be to attach the grip tape in place.
-
Make sure you are adhering the grip tape to the top of the deck. This will be apparent by looking at the shape of the surface.
-
