This version may contain incorrect edits. Switch to the latest verified snapshot.

How to Install the Belt Guards

Written By: Jared Ebersole
  • Comments: 0
  • Favorites: 0

Difficulty

Very easy

Steps

3

Time Required

00:03:00

Sections

1

Flags

0

  1. One of the belt guards will have a dot in the center. This guard will go on the motor mount with a dot on each side. This is usually the left motor.

    • One of the belt guards will have a dot in the center. This guard will go on the motor mount with a dot on each side. This is usually the left motor.

    Edit

  2. Add Loctite to each of the four screws

    • Add Loctite to each of the four screws

    Edit

  3. Place the belt guards on the motor mounts and tighten the four screws with the proper size hex wrench. Place the belt guards on the motor mounts and tighten the four screws with the proper size hex wrench. Place the belt guards on the motor mounts and tighten the four screws with the proper size hex wrench.

    • Place the belt guards on the motor mounts and tighten the four screws with the proper size hex wrench.

    Edit
Finish Line

Author

Jared Ebersole

Member since: 03/14/2020

5,556 Reputation

18 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 291