Difficulty
Moderate
Steps
3
Time Required
- ShredLight Installation 3 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Introduction
Install the ShredLights on the front, under the deck, above the trucks.
Install the Shredlights rear, above the deck, below the aluminum supports to hold the rear trucks.
-
-
Unpack ShredLights
-
-
-
Insert lights into the mounts before attempting to add the ShredLights. Note that the headlights are white, and have not markings on the lens. The tail lights have red markings on the lens.
-
Install front ShredLights *under* the deck, above the trucks.
-
The ShredLights can be mounted in a number of different positions, look at the mounts closely - the front mounts will "cup" the headlights.
-
-
-
Install tail light mounts above the board, and below the aluminum mount points.
-
