Editing Step 22 —
Assembling the board

Step Type:

Drag to rearrange

Open the small plastic package with hardware labeled "TRUCKS"

There are two different top metal rails, a left and a right, look at the angled portions closely to map these to the board angles.

Take a left and right rail, place the truck bolts through them and then press the bolts through the front of the deck

When the deck is positioned grip-tape down, the pad is the rear of the board. The pad is designed to support and seal the battery and electronics enclosure.

Add a riser to the underside of the deck over the bolts

Slide the front truck over the bolts and then secure it by installing a locknut on each bolt.

Hold the bolt in place with the wrench, and rotate the allen wrench for the fastest method of attaching these bolts.

Your contributions are licensed under the open source Creative Commons license.