Pending Edits to How to Install the Belt Guards
Note: Accepting or denying any edit implicitly applies to all earlier pending edits to the same step or introduction.
Step #3 edited: [Step edited]
Edited by Bryant Eadon (17)
(You don’t have enough reputation to patrol this edit.)
| - | [* 1] Place the belt guards on the motor mounts and tighten the four screws |
|---|---|
| + | [* 1] Place the belt guards on the motor mounts and tighten the four screws with the proper size hex wrench. |
Step #1 edited: [Step edited]
Edited by Bryant Eadon (17)
(You don’t have enough reputation to patrol this edit.)
| - | [* 1] One of the belt guards will have a dot in the center. This guard will go on the motor mount with a |
|---|---|
| + | [* 1] One of the belt guards will have a dot in the center. This guard will go on the motor mount with a dot on each side. This is usually the left motor. |